Factory complete UHT milk production line,Milk processing line

Product Description
Products can be stored for a long time without spoilage and do not require refrigeration, which has many benefits for manufacturers, retailers, and consumers. This includes expensive products such as cream, desserts, and sauces.

In modern ultra-high temperature equipment (UHT), milk is pumped through a closed system. During the process of preheating, high-temperature treatment, homogenization, ultra-high temperature treatment, cooling, and sterile packaging. Low acidity (pH above 4.5, milk pH above 6.5) liquid products are typically treated at 135 to 150 degrees Celsius for a few seconds, either through indirect heating or direct steam injection or soaking. High acidity (pH value below 4.5) products, such as juice, are usually heated at 90-95 degrees Celsius for 15-30 seconds. All components of the actual high-temperature downstream system are designed to be sterile to eliminate the risk of re infection, including sterile packaging in the packaging to protect the product from the effects of light and atmospheric oxygen. The environmental storage is normal.

General Information:

The entire line includes:
1. Water treatment section
2. Milk receiving or powder dissolving part
3. Preparation Department
4. Ultra high temperature sterilization section
5. Filling and Packaging Department
6. CIP cleaning section
7. Cooler
8. Compressor
9. Steam boiler
10. Installation Materials
technical parameter
Ingredients: fresh milk, powdered milk
Production: UHT whole fat UHT skimmed UHT flavored milk
Capacity: 2T/D-500T/D
Finished product packaging: brick shaped sterile cardboard boxes, pillow shaped sterile bags, plastic bottles, etc

Technical parameters:

Steam control system
The steam control system is an important component of Pasterizer, which includes steam flow control valve, plunger valve, steam pressure reducing valve, drain valve, and steam filter. A good steam control system can ensure stable operation of the machine.

Control panel
Our integrated automation software is created for operators with various levels of experience, connected to a 10.1-inch touch screen interface, providing operators with an overview of the pasteurization machine, including temperature, pressure, and more. Its performance is displayed in real-time, and if a malfunction occurs, the operator will immediately receive an alarm. If the automation solution is integrated into the production line, the entire production line can be viewed from one interface.

Diversion system
Verify the temperature of the product before and after the insulation pool. The product can only continue to leave the pasteurization machine after being heated to the appropriate temperature and kept in the insulation tank for a suitable period of time. If this is not the case, a signal will be automatically sent to the diverter valve and the product will be diverted back to the balance tank for recirculation.

Intelligent balance tank
Intelligent balance tank, equipped with CIP cleaning ball and high/low level transmitter. When the product is at a high liquid level in the balance tank, the feed pump will automatically stop. When the product is at a low liquid level in the balance tank, the product pump will automatically stop.

Company information

Our services

Trade shows

Certificate

Packaging & Shipping

 

FAQ
 

1 ) Q: How can we visit your factory?
A: If you come from abroad, air to shanghai airport, then we can pick you up at airport.

2) Q: How do you ensure the quality of your products?
A: Our Company is a state owned enterprise with more than 16 years experience , strict operation policy is performed, advanced processing machines guarangtee the precision of all components, workers with operation license, parts get multiprocessing, transmission& electrical parts are of international famous brand. Series of test and inspection are done in the whole producing state.

3) Q: What payment methods your company accept?
A: We accept most of the payment methods , but mainly accept T/T, L/C at sight .

4) Q: How long is the warranty time for your products?
A: Our officially promised warranty time is 12 months after commissioning .

5) Q: I am new in this field,can you supply us turnkey services?
A: YES.We can supply all the system including Market Analysis/Product Analysis/Location Choice/Processing Flow Design/Equipment Layout Design/Building Design direction/Equipment mode selection/Equipment Manufacturing/Equipment Mounting/Equipment Debugging/Worker Training.

6) Q: I haven't done business with you company before, how can I trust your company ?
A: Our company has been in Alibaba.com for 14 years, which is longer than most of our fellow suppliers, we have been golden suppliers for years. What ' s more, we have got quite a lot authority certificates, for example, CE, ISO9001, Alibaba onsite check certificate.

7) Q: What ' s the shipment terms and delivery time of your company?
A: Well, the delivery time depend on the quantity of your order. Usually is 20 days . For some customized machine 30 days is necessary.

8) Q: Can you supply OEM services?
A: Yes,we have our R&D team,and we have more than 400 workers with workshop area 75000 square meters.

9) Q: Do you give any Discount?
A: I will surely try my best to help you get those by the best price and good service at the same time.